FOME Overview
What is FOME
Which FOME hardware to pick
Currently there are a few sweet options for hardware, all have the same brain, but with different baseboards.
Where to get firmware
FOME firmware releases are located here, on Github. You can download a release and install to the ECU with the console, or another way is to use TunerStudio (TS).
Updating the firmware
Updating the firmware is easy to do, however it is important to do it correctly to prevent errors or board
Performing a Safe First Start
Safety Considerations
How to first setup a board for use
Outputs, etc. Checking correct tune loaded
How to test inputs and outputs
Input tests
Tips and Tricks
Power Cycle the ECU
How to pick a fuel method
Use this to explain the pros and cons of each of the methods and which is more suitable for certain builds
Guide to Tuning the ETB and VVT PIDs
Let's discuss the ETB and VVT PID controls and some give techniques for tuning these loops.
Miata MX5 Quick Start Guide
So, you've just got yourself a shiny new BMM MX5 Miata ECU for your NA or NB, nice! If you're wondering how to install and get it running, you've come to the right place. This guide will cover how to install the ECU to the car with a Bosch LSU 4.9 wideband oxygen sensor and a mass air pressure (MAP) line. Installation of additional sensors or peripherals is covered in the advanced guides.
Where to Find Tunes
Tunes and logs uploaded by the community can be found on FOME's tuning portal.